No version for distro dashing. Known supported distros are highlighted in the buttons above.
No version for distro crystal. Known supported distros are highlighted in the buttons above.
No version for distro bouncy. Known supported distros are highlighted in the buttons above.

Package Summary

Tags No category tags.
Version 0.8.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/ros-drivers/rosserial.git
VCS Type git
VCS Version melodic-devel
Last Updated 2019-04-09
Dev Status MAINTAINED
Released RELEASED

Package Description

A Python-based implementation of the rosserial protocol.

Additional Links

Maintainers

  • Paul Bouchier
  • Mike Purvis

Authors

  • Michael Ferguson
README
No README found. See repository README.
CHANGELOG

Changelog for package rosserial_python

0.8.0 (2018-10-11)

  • fix no attribute message_cache issue in message_info_service (#393)
  • Added service to force an Arduino hard reset in serial_node.py (#349)
    • Added hard_reset service call to serial_node
    • Refactored SerialClient to use a write thread, working around deadlock when both Arduino and serial_node.py get stuck writing to each other.
    • Updated cmakelists and package.xml to include dependencies. Removed unnecessary tcp functionality from arduino-specific serial_node.py
  • Add support for boolean parameters (#355)
  • [python] fix an unboundlocalerror (#346)
  • Retry opening the serial port every 3 seconds (#342)
    • Retry opening the serial port every 3 seconds
    • Break out of the retry loop if we\'ve been shut down
  • Contributors: Chris Spencer, Kenta Yonekura, Pikrass, dlguo-cpr

0.7.7 (2017-11-29)

  • Fix catkin lint errors (#296)
  • pyserial bug workaround to fix rosserial_test test against SerialClient.py (#313)
  • Add requestTopics to correct publish before setup (#308)
  • Contributors: Bei Chen Liu, Tom O\'Connell

0.7.6 (2017-03-01)

  • Fix typo in serial error message (#253)
  • Contributors: Jonathan Binney

0.7.5 (2016-11-22)

0.7.4 (2016-09-21)

  • Try to read more serial bytes in a loop (#248)
  • Add missing \"import errno\" to rosserial_python
  • Integration tests for rosserial (#243)
  • rosserial_python tcp server allowing socket address reuse (#242)
  • Contributors: Mike Purvis, Vitor Matos, davidshin172

0.7.3 (2016-08-05)

0.7.2 (2016-07-15)

0.7.1 (2015-07-06)

0.7.0 (2015-04-23)

  • Adds default queue_size of 10 for rosserial_python publisher.
  • Fixed queue size warning with diagnostics publisher.
  • We don\'t need roslib.load_manifest any more under catkin.
  • Contributors: Basheer Subei, David Lavoie-Boutin, Mike Purvis, eisoku9618

0.6.3 (2014-11-05)

0.6.2 (2014-09-10)

  • Added MD5 verification for request and response messags upon ServiceClient registration.
  • Enabled registration of service clients
  • Contributors: Jonathan Jekir

0.6.1 (2014-06-30)

0.6.0 (2014-06-11)

0.5.6 (2014-06-11)

  • Add Mike Purvis as maintainer to all but xbee.
  • Added the missing inWaiting() to RosSerialServer
  • improvement: inform user of mismatched checksum for topic_id and msg
  • Fix indent on if-block.
  • Check for data in buffer before attempting to tryRead. Insert a 1ms sleep to avoid pegging the processor.
  • Better warning message for tryRead.
  • fix two points: 1. the number of bytes to read for chk_byte, 2. the wrong indentation about the defination of sendDiagnostics()
  • Try-block to handle IOErrors thrown from tryRead
  • Merge from hydro-devel.
  • fix the dupilcated registration problem of subscriber
  • remove ID_TX_STOP from rosserial_msgs/msg/TopicInfo.msg, using hardcode modification. fix the dupilcated registration problem of subscriber
  • modified rosserial
  • modified rosserial
  • Contributors: Girts Linde, Mike Purvis, Moju Zhao, bakui, denis

0.5.5 (2014-01-14)

0.5.4 (2013-10-17)

0.5.3 (2013-09-21)

  • De-register subscribers and service clients upon disconnect. This prevents callbacks being called after a client program terminates a connection.
  • Fill out package.xml properly, include docstring in helper Python node.
  • Add message info helper script that supports rosserial_server

0.5.2 (2013-07-17)

  • Fix release version

0.5.1 (2013-07-15)

  • Merge branch \'rosserial_bakui\' of git://github.com/tongtybj/rosserial into tongtybj-rosserial_bakui
    • Modified the frame structure for serial communication, particularly add the checksum for msg_len
  • Incorporate protocol version in message. Try to detect protocol version mismatch and give appropriate hints.

0.4.5 (2013-07-02)

  • Fix SeviceServer member names in error message \'m\' prefix was omitted, causing an exception while trying to print an error about md5 mismatches. Fix this to allow the error to be presented to the user.
  • Allow service calls with empty requests std_srvs::Empty has a request message of size zero. SerialClient.send returns the size of the sent message, which is checked to ensure data crossed the serial line. Accommodate services with empty requests by modifying the check to acknowledge all transmissions of zero or more bytes as valid.
  • revert name of node, add a few comments/spacing
  • fix private parameters - temporary fix breaks fork_server for tcp
  • Fix #35

0.4.4 (2013-03-20)

  • Fixed \"Lost sync\" message at initial connection that happens on both Arduino & embeddedLinux. Problem was last_sync initialized to epoch and compared against Time.now() always times out on first compare.

0.4.3 (2013-03-13 14:08)

0.4.2 (2013-03-13 01:15)

0.4.1 (2013-03-09)

0.4.0 (2013-03-08)

  • initial catkin version on github

Wiki Tutorials

See ROS Wiki Tutorials for more details.

Source Tutorials

Not currently indexed.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged rosserial_python at answers.ros.org

Package Summary

Tags No category tags.
Version 0.7.7
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/ros-drivers/rosserial.git
VCS Type git
VCS Version jade-devel
Last Updated 2018-09-19
Dev Status MAINTAINED
Released RELEASED

Package Description

A Python-based implementation of the rosserial protocol.

Additional Links

Maintainers

  • Paul Bouchier
  • Mike Purvis

Authors

  • Michael Ferguson
README
No README found. See repository README.
CHANGELOG

Changelog for package rosserial_python

0.7.7 (2017-11-29)

  • Fix catkin lint errors (#296)
  • pyserial bug workaround to fix rosserial_test test against SerialClient.py (#313)
  • Add requestTopics to correct publish before setup (#308)
  • Contributors: Bei Chen Liu, Tom O\'Connell

0.7.6 (2017-03-01)

  • Fix typo in serial error message (#253)
  • Contributors: Jonathan Binney

0.7.5 (2016-11-22)

0.7.4 (2016-09-21)

  • Try to read more serial bytes in a loop (#248)
  • Add missing \"import errno\" to rosserial_python
  • Integration tests for rosserial (#243)
  • rosserial_python tcp server allowing socket address reuse (#242)
  • Contributors: Mike Purvis, Vitor Matos, davidshin172

0.7.3 (2016-08-05)

0.7.2 (2016-07-15)

0.7.1 (2015-07-06)

0.7.0 (2015-04-23)

  • Adds default queue_size of 10 for rosserial_python publisher.
  • Fixed queue size warning with diagnostics publisher.
  • We don\'t need roslib.load_manifest any more under catkin.
  • Contributors: Basheer Subei, David Lavoie-Boutin, Mike Purvis, eisoku9618

0.6.3 (2014-11-05)

0.6.2 (2014-09-10)

  • Added MD5 verification for request and response messags upon ServiceClient registration.
  • Enabled registration of service clients
  • Contributors: Jonathan Jekir

0.6.1 (2014-06-30)

0.6.0 (2014-06-11)

0.5.6 (2014-06-11)

  • Add Mike Purvis as maintainer to all but xbee.
  • Added the missing inWaiting() to RosSerialServer
  • improvement: inform user of mismatched checksum for topic_id and msg
  • Fix indent on if-block.
  • Check for data in buffer before attempting to tryRead. Insert a 1ms sleep to avoid pegging the processor.
  • Better warning message for tryRead.
  • fix two points: 1. the number of bytes to read for chk_byte, 2. the wrong indentation about the defination of sendDiagnostics()
  • Try-block to handle IOErrors thrown from tryRead
  • Merge from hydro-devel.
  • fix the dupilcated registration problem of subscriber
  • remove ID_TX_STOP from rosserial_msgs/msg/TopicInfo.msg, using hardcode modification. fix the dupilcated registration problem of subscriber
  • modified rosserial
  • modified rosserial
  • Contributors: Girts Linde, Mike Purvis, Moju Zhao, bakui, denis

0.5.5 (2014-01-14)

0.5.4 (2013-10-17)

0.5.3 (2013-09-21)

  • De-register subscribers and service clients upon disconnect. This prevents callbacks being called after a client program terminates a connection.
  • Fill out package.xml properly, include docstring in helper Python node.
  • Add message info helper script that supports rosserial_server

0.5.2 (2013-07-17)

  • Fix release version

0.5.1 (2013-07-15)

  • Merge branch \'rosserial_bakui\' of git://github.com/tongtybj/rosserial into tongtybj-rosserial_bakui
    • Modified the frame structure for serial communication, particularly add the checksum for msg_len
  • Incorporate protocol version in message. Try to detect protocol version mismatch and give appropriate hints.

0.4.5 (2013-07-02)

  • Fix SeviceServer member names in error message \'m\' prefix was omitted, causing an exception while trying to print an error about md5 mismatches. Fix this to allow the error to be presented to the user.
  • Allow service calls with empty requests std_srvs::Empty has a request message of size zero. SerialClient.send returns the size of the sent message, which is checked to ensure data crossed the serial line. Accommodate services with empty requests by modifying the check to acknowledge all transmissions of zero or more bytes as valid.
  • revert name of node, add a few comments/spacing
  • fix private parameters - temporary fix breaks fork_server for tcp
  • Fix #35

0.4.4 (2013-03-20)

  • Fixed \"Lost sync\" message at initial connection that happens on both Arduino & embeddedLinux. Problem was last_sync initialized to epoch and compared against Time.now() always times out on first compare.

0.4.3 (2013-03-13 14:08)

0.4.2 (2013-03-13 01:15)

0.4.1 (2013-03-09)

0.4.0 (2013-03-08)

  • initial catkin version on github

Wiki Tutorials

See ROS Wiki Tutorials for more details.

Source Tutorials

Not currently indexed.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged rosserial_python at answers.ros.org

Package Summary

Tags No category tags.
Version 0.7.7
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/ros-drivers/rosserial.git
VCS Type git
VCS Version jade-devel
Last Updated 2018-09-19
Dev Status MAINTAINED
Released RELEASED

Package Description

A Python-based implementation of the rosserial protocol.

Additional Links

Maintainers

  • Paul Bouchier
  • Mike Purvis

Authors

  • Michael Ferguson
README
No README found. See repository README.
CHANGELOG

Changelog for package rosserial_python

0.7.7 (2017-11-29)

  • Fix catkin lint errors (#296)
  • pyserial bug workaround to fix rosserial_test test against SerialClient.py (#313)
  • Add requestTopics to correct publish before setup (#308)
  • Contributors: Bei Chen Liu, Tom O\'Connell

0.7.6 (2017-03-01)

  • Fix typo in serial error message (#253)
  • Contributors: Jonathan Binney

0.7.5 (2016-11-22)

0.7.4 (2016-09-21)

  • Try to read more serial bytes in a loop (#248)
  • Add missing \"import errno\" to rosserial_python
  • Integration tests for rosserial (#243)
  • rosserial_python tcp server allowing socket address reuse (#242)
  • Contributors: Mike Purvis, Vitor Matos, davidshin172

0.7.3 (2016-08-05)

0.7.2 (2016-07-15)

0.7.1 (2015-07-06)

0.7.0 (2015-04-23)

  • Adds default queue_size of 10 for rosserial_python publisher.
  • Fixed queue size warning with diagnostics publisher.
  • We don\'t need roslib.load_manifest any more under catkin.
  • Contributors: Basheer Subei, David Lavoie-Boutin, Mike Purvis, eisoku9618

0.6.3 (2014-11-05)

0.6.2 (2014-09-10)

  • Added MD5 verification for request and response messags upon ServiceClient registration.
  • Enabled registration of service clients
  • Contributors: Jonathan Jekir

0.6.1 (2014-06-30)

0.6.0 (2014-06-11)

0.5.6 (2014-06-11)

  • Add Mike Purvis as maintainer to all but xbee.
  • Added the missing inWaiting() to RosSerialServer
  • improvement: inform user of mismatched checksum for topic_id and msg
  • Fix indent on if-block.
  • Check for data in buffer before attempting to tryRead. Insert a 1ms sleep to avoid pegging the processor.
  • Better warning message for tryRead.
  • fix two points: 1. the number of bytes to read for chk_byte, 2. the wrong indentation about the defination of sendDiagnostics()
  • Try-block to handle IOErrors thrown from tryRead
  • Merge from hydro-devel.
  • fix the dupilcated registration problem of subscriber
  • remove ID_TX_STOP from rosserial_msgs/msg/TopicInfo.msg, using hardcode modification. fix the dupilcated registration problem of subscriber
  • modified rosserial
  • modified rosserial
  • Contributors: Girts Linde, Mike Purvis, Moju Zhao, bakui, denis

0.5.5 (2014-01-14)

0.5.4 (2013-10-17)

0.5.3 (2013-09-21)

  • De-register subscribers and service clients upon disconnect. This prevents callbacks being called after a client program terminates a connection.
  • Fill out package.xml properly, include docstring in helper Python node.
  • Add message info helper script that supports rosserial_server

0.5.2 (2013-07-17)

  • Fix release version

0.5.1 (2013-07-15)

  • Merge branch \'rosserial_bakui\' of git://github.com/tongtybj/rosserial into tongtybj-rosserial_bakui
    • Modified the frame structure for serial communication, particularly add the checksum for msg_len
  • Incorporate protocol version in message. Try to detect protocol version mismatch and give appropriate hints.

0.4.5 (2013-07-02)

  • Fix SeviceServer member names in error message \'m\' prefix was omitted, causing an exception while trying to print an error about md5 mismatches. Fix this to allow the error to be presented to the user.
  • Allow service calls with empty requests std_srvs::Empty has a request message of size zero. SerialClient.send returns the size of the sent message, which is checked to ensure data crossed the serial line. Accommodate services with empty requests by modifying the check to acknowledge all transmissions of zero or more bytes as valid.
  • revert name of node, add a few comments/spacing
  • fix private parameters - temporary fix breaks fork_server for tcp
  • Fix #35

0.4.4 (2013-03-20)

  • Fixed \"Lost sync\" message at initial connection that happens on both Arduino & embeddedLinux. Problem was last_sync initialized to epoch and compared against Time.now() always times out on first compare.

0.4.3 (2013-03-13 14:08)

0.4.2 (2013-03-13 01:15)

0.4.1 (2013-03-09)

0.4.0 (2013-03-08)

  • initial catkin version on github

Wiki Tutorials

See ROS Wiki Tutorials for more details.

Source Tutorials

Not currently indexed.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged rosserial_python at answers.ros.org

No version for distro ardent. Known supported distros are highlighted in the buttons above.

Package Summary

Tags No category tags.
Version 0.7.7
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/ros-drivers/rosserial.git
VCS Type git
VCS Version jade-devel
Last Updated 2018-09-19
Dev Status MAINTAINED
Released RELEASED

Package Description

A Python-based implementation of the rosserial protocol.

Additional Links

Maintainers

  • Paul Bouchier
  • Mike Purvis

Authors

  • Michael Ferguson
README
No README found. See repository README.
CHANGELOG

Changelog for package rosserial_python

0.7.7 (2017-11-29)

  • Fix catkin lint errors (#296)
  • pyserial bug workaround to fix rosserial_test test against SerialClient.py (#313)
  • Add requestTopics to correct publish before setup (#308)
  • Contributors: Bei Chen Liu, Tom O\'Connell

0.7.6 (2017-03-01)

  • Fix typo in serial error message (#253)
  • Contributors: Jonathan Binney

0.7.5 (2016-11-22)

0.7.4 (2016-09-21)

  • Try to read more serial bytes in a loop (#248)
  • Add missing \"import errno\" to rosserial_python
  • Integration tests for rosserial (#243)
  • rosserial_python tcp server allowing socket address reuse (#242)
  • Contributors: Mike Purvis, Vitor Matos, davidshin172

0.7.3 (2016-08-05)

0.7.2 (2016-07-15)

0.7.1 (2015-07-06)

0.7.0 (2015-04-23)

  • Adds default queue_size of 10 for rosserial_python publisher.
  • Fixed queue size warning with diagnostics publisher.
  • We don\'t need roslib.load_manifest any more under catkin.
  • Contributors: Basheer Subei, David Lavoie-Boutin, Mike Purvis, eisoku9618

0.6.3 (2014-11-05)

0.6.2 (2014-09-10)

  • Added MD5 verification for request and response messags upon ServiceClient registration.
  • Enabled registration of service clients
  • Contributors: Jonathan Jekir

0.6.1 (2014-06-30)

0.6.0 (2014-06-11)

0.5.6 (2014-06-11)

  • Add Mike Purvis as maintainer to all but xbee.
  • Added the missing inWaiting() to RosSerialServer
  • improvement: inform user of mismatched checksum for topic_id and msg
  • Fix indent on if-block.
  • Check for data in buffer before attempting to tryRead. Insert a 1ms sleep to avoid pegging the processor.
  • Better warning message for tryRead.
  • fix two points: 1. the number of bytes to read for chk_byte, 2. the wrong indentation about the defination of sendDiagnostics()
  • Try-block to handle IOErrors thrown from tryRead
  • Merge from hydro-devel.
  • fix the dupilcated registration problem of subscriber
  • remove ID_TX_STOP from rosserial_msgs/msg/TopicInfo.msg, using hardcode modification. fix the dupilcated registration problem of subscriber
  • modified rosserial
  • modified rosserial
  • Contributors: Girts Linde, Mike Purvis, Moju Zhao, bakui, denis

0.5.5 (2014-01-14)

0.5.4 (2013-10-17)

0.5.3 (2013-09-21)

  • De-register subscribers and service clients upon disconnect. This prevents callbacks being called after a client program terminates a connection.
  • Fill out package.xml properly, include docstring in helper Python node.
  • Add message info helper script that supports rosserial_server

0.5.2 (2013-07-17)

  • Fix release version

0.5.1 (2013-07-15)

  • Merge branch \'rosserial_bakui\' of git://github.com/tongtybj/rosserial into tongtybj-rosserial_bakui
    • Modified the frame structure for serial communication, particularly add the checksum for msg_len
  • Incorporate protocol version in message. Try to detect protocol version mismatch and give appropriate hints.

0.4.5 (2013-07-02)

  • Fix SeviceServer member names in error message \'m\' prefix was omitted, causing an exception while trying to print an error about md5 mismatches. Fix this to allow the error to be presented to the user.
  • Allow service calls with empty requests std_srvs::Empty has a request message of size zero. SerialClient.send returns the size of the sent message, which is checked to ensure data crossed the serial line. Accommodate services with empty requests by modifying the check to acknowledge all transmissions of zero or more bytes as valid.
  • revert name of node, add a few comments/spacing
  • fix private parameters - temporary fix breaks fork_server for tcp
  • Fix #35

0.4.4 (2013-03-20)

  • Fixed \"Lost sync\" message at initial connection that happens on both Arduino & embeddedLinux. Problem was last_sync initialized to epoch and compared against Time.now() always times out on first compare.

0.4.3 (2013-03-13 14:08)

0.4.2 (2013-03-13 01:15)

0.4.1 (2013-03-09)

0.4.0 (2013-03-08)

  • initial catkin version on github

Wiki Tutorials

See ROS Wiki Tutorials for more details.

Source Tutorials

Not currently indexed.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged rosserial_python at answers.ros.org

Package Summary

Tags No category tags.
Version 0.6.4
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/ros-drivers/rosserial.git
VCS Type git
VCS Version indigo-devel
Last Updated 2018-03-22
Dev Status MAINTAINED
Released RELEASED

Package Description

A Python-based implementation of the ROS serial protocol.

Additional Links

Maintainers

  • Paul Bouchier
  • Mike Purvis

Authors

  • Michael Ferguson
README
No README found. See repository README.
CHANGELOG

Changelog for package rosserial_python

0.6.4 (2015-07-06)

  • Add default queue_size of 10 for rosserial_python publisher, fixes warning.
  • Contributors: Basheer Subei, David Lavoie-Boutin

0.6.3 (2014-11-05)

0.6.2 (2014-09-10)

  • Added MD5 verification for request and response messags upon ServiceClient registration.
  • Enabled registration of service clients
  • Contributors: Jonathan Jekir

0.6.1 (2014-06-30)

0.6.0 (2014-06-11)

0.5.6 (2014-06-11)

  • Add Mike Purvis as maintainer to all but xbee.
  • Added the missing inWaiting() to RosSerialServer
  • improvement: inform user of mismatched checksum for topic_id and msg
  • Fix indent on if-block.
  • Check for data in buffer before attempting to tryRead. Insert a 1ms sleep to avoid pegging the processor.
  • Better warning message for tryRead.
  • fix two points: 1. the number of bytes to read for chk_byte, 2. the wrong indentation about the defination of sendDiagnostics()
  • Try-block to handle IOErrors thrown from tryRead
  • Merge from hydro-devel.
  • fix the dupilcated registration problem of subscriber
  • remove ID_TX_STOP from rosserial_msgs/msg/TopicInfo.msg, using hardcode modification. fix the dupilcated registration problem of subscriber
  • modified rosserial
  • modified rosserial
  • Contributors: Girts Linde, Mike Purvis, Moju Zhao, bakui, denis

0.5.5 (2014-01-14)

0.5.4 (2013-10-17)

0.5.3 (2013-09-21)

  • De-register subscribers and service clients upon disconnect. This prevents callbacks being called after a client program terminates a connection.
  • Fill out package.xml properly, include docstring in helper Python node.
  • Add message info helper script that supports rosserial_server

0.5.2 (2013-07-17)

  • Fix release version

0.5.1 (2013-07-15)

  • Merge branch \'rosserial_bakui\' of git://github.com/tongtybj/rosserial into tongtybj-rosserial_bakui
    • Modified the frame structure for serial communication, particularly add the checksum for msg_len
  • Incorporate protocol version in message. Try to detect protocol version mismatch and give appropriate hints.

0.4.5 (2013-07-02)

  • Fix SeviceServer member names in error message \'m\' prefix was omitted, causing an exception while trying to print an error about md5 mismatches. Fix this to allow the error to be presented to the user.
  • Allow service calls with empty requests std_srvs::Empty has a request message of size zero. SerialClient.send returns the size of the sent message, which is checked to ensure data crossed the serial line. Accommodate services with empty requests by modifying the check to acknowledge all transmissions of zero or more bytes as valid.
  • revert name of node, add a few comments/spacing
  • fix private parameters - temporary fix breaks fork_server for tcp
  • Fix #35

0.4.4 (2013-03-20)

  • Fixed \"Lost sync\" message at initial connection that happens on both Arduino & embeddedLinux. Problem was last_sync initialized to epoch and compared against Time.now() always times out on first compare.

0.4.3 (2013-03-13 14:08)

0.4.2 (2013-03-13 01:15)

0.4.1 (2013-03-09)

0.4.0 (2013-03-08)

  • initial catkin version on github

Wiki Tutorials

See ROS Wiki Tutorials for more details.

Source Tutorials

Not currently indexed.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged rosserial_python at answers.ros.org

Package Summary

Tags No category tags.
Version 0.5.6
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/ros-drivers/rosserial.git
VCS Type git
VCS Version hydro-devel
Last Updated 2015-02-21
Dev Status MAINTAINED
Released RELEASED

Package Description

A Python-based implementation of the ROS serial protocol.

Additional Links

Maintainers

  • Paul Bouchier
  • Mike Purvis

Authors

  • Michael Ferguson
README
No README found. See repository README.
CHANGELOG

Changelog for package rosserial_python

0.5.6 (2014-06-11)

  • Add Mike Purvis as maintainer to all but xbee.
  • Added the missing inWaiting() to RosSerialServer
  • improvement: inform user of mismatched checksum for topic_id and msg
  • Fix indent on if-block.
  • Check for data in buffer before attempting to tryRead. Insert a 1ms sleep to avoid pegging the processor.
  • Better warning message for tryRead.
  • fix two points: 1. the number of bytes to read for chk_byte, 2. the wrong indentation about the defination of sendDiagnostics()
  • Try-block to handle IOErrors thrown from tryRead
  • Merge from hydro-devel.
  • fix the dupilcated registration problem of subscriber
  • remove ID_TX_STOP from rosserial_msgs/msg/TopicInfo.msg, using hardcode modification. fix the dupilcated registration problem of subscriber
  • modified rosserial
  • modified rosserial
  • Contributors: Girts Linde, Mike Purvis, Moju Zhao, bakui, denis

0.5.5 (2014-01-14)

0.5.4 (2013-10-17)

0.5.3 (2013-09-21)

  • De-register subscribers and service clients upon disconnect. This prevents callbacks being called after a client program terminates a connection.
  • Fill out package.xml properly, include docstring in helper Python node.
  • Add message info helper script that supports rosserial_server

0.5.2 (2013-07-17)

  • Fix release version

0.5.1 (2013-07-15)

  • Merge branch \'rosserial_bakui\' of git://github.com/tongtybj/rosserial into tongtybj-rosserial_bakui
    • Modified the frame structure for serial communication, particularly add the checksum for msg_len
  • Incorporate protocol version in message. Try to detect protocol version mismatch and give appropriate hints.

0.4.5 (2013-07-02)

  • Fix SeviceServer member names in error message \'m\' prefix was omitted, causing an exception while trying to print an error about md5 mismatches. Fix this to allow the error to be presented to the user.
  • Allow service calls with empty requests std_srvs::Empty has a request message of size zero. SerialClient.send returns the size of the sent message, which is checked to ensure data crossed the serial line. Accommodate services with empty requests by modifying the check to acknowledge all transmissions of zero or more bytes as valid.
  • revert name of node, add a few comments/spacing
  • fix private parameters - temporary fix breaks fork_server for tcp
  • Fix #35

0.4.4 (2013-03-20)

  • Fixed \"Lost sync\" message at initial connection that happens on both Arduino & embeddedLinux. Problem was last_sync initialized to epoch and compared against Time.now() always times out on first compare.

0.4.3 (2013-03-13 14:08)

0.4.2 (2013-03-13 01:15)

0.4.1 (2013-03-09)

0.4.0 (2013-03-08)

  • initial catkin version on github

Wiki Tutorials

See ROS Wiki Tutorials for more details.

Source Tutorials

Not currently indexed.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged rosserial_python at answers.ros.org