ROS index logo ROS Index
  1. Home
  2. Packages
  3. mtig_driver
 
No version for distro humble showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro jazzy showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro kilted showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro rolling showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro ardent showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro bouncy showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro crystal showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro eloquent showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro dashing showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro galactic showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro foxy showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro iron showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro lunar showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code
Wiki

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro jade showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code
Wiki

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code
Wiki

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro hydro showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code
Wiki

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro kinetic showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code
Wiki

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro melodic showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code
Wiki

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange

No version for distro noetic showing indigo. Known supported distros are highlighted in the buttons above.
Package symbol

mtig_driver package from mtig_driver repo

mtig_driver

ROS Distro
indigo

API Docs
Browse Code
Wiki

Package Summary

Tags No category tags.
Version 0.9.0
License BSD
Build type CATKIN
Use RECOMMENDED

Repository Summary

Checkout URI https://github.com/lukscasanova/mtig_driver.git
VCS Type git
VCS Version master
Last Updated 2017-12-27
Dev Status DEVELOPED
CI status No Continuous Integration
Released UNRELEASED
Tags No category tags.
Contributing Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)

Package Description

ROS driver for Xsens MTI-G-700 series motion trackers - modified to publish GPS messages

Additional Links

Maintainers

  • Lucas Casanova Nogueira

Authors

  • Lucas Casanova Nogueira
README

How to use:

  1) Download the MT Software Suite and install it on a Windows machine (you may skip this step and use default sensor configuration), then download the MT SDK for Linux and install it on a Linux machine (this should be the machine that ROS is installed on).

Here is the software website: http://www.xsens.com/en/mt-software-suite

  2) Follow the instructions in the MT SDK for Linux to install the software and make sure the examples run correctly with the sensor. Here is a summary of the installation procedure.

    (a) Unpack the MT SDK.
    (b) Run installer: ./mtsdk_linux_4.3.sh
    (c) Examples here: /usr/local/xsens/examples/mtsdk

  (3) Connect the sensor to the Windows machine and open the MT Manager. Click the button on top of the screen for “output configuration options”, make sure “Turn Rate” and “Acceleration” are checked. You can also change frequency on the same page. If you skip this step, the sensor is configured to give orientation only by default.

  (4) Clone this driver from github to a ROS workspace. Go to the cloned folder and find the “src/serialkey.h” file, put your license number in it and use “rosmake” to build it.
  
  (5) You may need to install the kernel available at https://github.com/xsens/xsens_mt
  (6) Verify if the usb device was recognized by using the following command:
   
   >> ls /dev/ttyUSB0
  
	you may need to replace the 0 for another number if there are more usb devices in your computer
	
  (7)Once you found the MTi-G-700 address in /dev, you have to enable executioon using the command
   sudo chmod 777 /dev/ttyUSB0
   here, again, the 0 may change depending on your setup
  
  (5) Roslaunch the “receive_xsens.launch” file in /launch folder. The driver will publish sensor_msgs/Imu typed messages named /imu/data.
CHANGELOG
No CHANGELOG found.

Wiki Tutorials

This package does not provide any links to tutorials in it's rosindex metadata. You can check on the ROS Wiki Tutorials page for the package.

Package Dependencies

Deps Name
roscpp
std_msgs
sensor_msgs
message_generation
tf
catkin
message_runtime

System Dependencies

No direct system dependencies.

Dependant Packages

No known dependants.

Launch files

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged mtig_driver at Robotics Stack Exchange