bin_pose_emulator

Generator of random bin poses. It provides /bin_pose service which returns a combination of 3 bin picking points in predefined bin:

• Grasp Point
• Approach Point
• Deapproach point The Grasp point is the goal pose in predefined Virtual Bin. The Approach point is located at the normal vector given by Grasp Point orientation and the Deapproach point is located right above the Grasp point.

Following video demonstrates the capabilities of bin_pose_emulator in combination with ABB IRB1200 and MoveIt.

Installation

This package has been released as ROS Kinetic binaries, installation via apt-get is possible:

sudo apt-get install ros-kinetic-binpicking-utils

Usage

roslaunch bin_pose_emulator bin_pose_emulator

Call ROS service with an Empty request:

rosservice call /bin_pose

Service response:

grasp_pose: 
  position: 
    x: 0.582990474831
    y: 0.132920391803
    z: 0.110564293991
  orientation: 
    x: 0.113430335549
    y: 0.71905280478
    z: -0.119797227723
    w: 0.675089066083
approach_pose: 
  position: 
    x: 0.589268137291
    y: 0.132782671333
    z: 0.210366960715
  orientation: 
    x: 0.113430335549
    y: 0.71905280478
    z: -0.119797227723
    w: 0.675089066083
deapproach_pose: 
  position: 
    x: 0.582990474831
    y: 0.132920391803
    z: 0.260564299952
  orientation: 
    x: 0.113430335549
    y: 0.71905280478
    z: -0.119797227723
    w: 0.675089066083

Visualization

In order to simplify configuration and usage of this emulator, basic visualization is available - bin_pose_emulator publishes two messages to bin_pose_visualization topic. Use Marker view in RViz to visualize the pose of the virtual bin and the location of the current grasp point. Both Markers are published with base_link as a reference frame.

Config

Virtual Bin is defined by bin_center_ and bin_size_ parameters, while allowed orientation is set by roll, pitch and yaw range. By default we assume that tool0 link of robot is aligned with vertical axis, pointing to the ground - RPY is [0,90,0]. roll_range, pitch_range and yaw_range extend default pose orientation into allowed grasp cone. Approach distance defines how far in direction of the normal vector given by the Grasp Point orientation is the Approach point. The deapproach_height configures height of vertical movement when moving away from the Grasp Point. Example config file is located at the onfig folder. Change launch file parameter filepath to adopt launch to your custom config file.

Example Yaml config file:

bin_center_x: 0.5
bin_center_y: 0
bin_center_z: 0.1

bin_size_x: 0.2
bin_size_y: 0.5
bin_size_z: 0.1

roll_default: 0
pitch_default: 3.14
yaw_default: 0

roll_range: 0.707
pitch_range: 0.707
yaw_range: 0.707

approach_distance: 0.1
deapproach_height: 0.15

Changelog for package bin_pose_emulator

0.1.4 (2017-09-08)

• adding CHANGELOGS
• syntax fix
• Contributors: Frantisek Durovsky
• syntax fix
• Contributors: Frantisek Durovsky

0.1.3 (2017-07-06)

• Disable loading default yaml config
• adding examle yaml config install
• typo fix
• Contributors: Frantisek Durovsky
• Disable loading default yaml config
• adding examle yaml config install
• typo fix
• Contributors: Frantisek Durovsky

0.1.2 (2017-06-12)

• added install targets
• Update Readme.md
• Create README.md
• Contributors: Frantisek Durovsky

0.1.1 (2017-06-06)

• moving .travis.yml
• initial commit
• initial commit
• Contributors: Frantisek Durovsky