No version for distro humble. Known supported distros are highlighted in the buttons above.
No version for distro iron. Known supported distros are highlighted in the buttons above.
No version for distro rolling. Known supported distros are highlighted in the buttons above.
|
schunk_simulated_tactile_sensors package from schunk_modular_robotics reposchunk_description schunk_libm5api schunk_modular_robotics schunk_powercube_chain schunk_sdh schunk_simulated_tactile_sensors |
|
|
Package Summary
| Tags | No category tags. |
| Version | 0.6.14 |
| License | Apache 2.0 |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Checkout URI | https://github.com/ipa320/schunk_modular_robotics.git |
| VCS Type | git |
| VCS Version | kinetic_dev |
| Last Updated | 2022-05-06 |
| Dev Status | MAINTAINED |
| CI status | Continuous Integration : 0 / 0 |
| Released | RELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Package Description
This package provides simulated tactile sensors for the Schunk Dextrous
Hand (SDH) which is mounted on the Care-O-bot arm. The node subscribes to
the Gazebo bumper topics of the SDH. It transforms the Gazebo feedback to
the "tactile_data" topic to provide the same tactile sensor interface as
the schunk_sdh package.
The following parameters can be set:
* cells_x: The number of patches on the tactile sensor in the direction
perpendicular to the finger. Defaults to 6.
* cells_y: The number of patches on the tactile sensor along the direction
of the finger. Defaults to 14.
* output_range: The maximum output value of one patch. Defaults to 3500.
* sensitivity: The change of output in one patch per Newton. Defaults to
350. The sensitivity can be approximated by the following
formula: S = output_range / (measurement_range * cell_area)
- The measurement range of the tactile pads is 250 kPa (from
the data sheet).
- The output range can be determined by experiment from the
real SDH. It is about 3500.
- The cell area is the size of one patch. Length and width
of the area are determined by dividing the length/width
of the collision surface by the number of cells in the
respective direction.
Important: In most cases this is NOT the cell area that is
given in the data sheet!
* filter_length: The length of the moving average filter which smoothes
the values from simulation. Defaults to 10.
The node subscribes to the following topics to receive data from the
simulation:
* thumb_2/state
* thumb_3/state
* finger_12/state
* finger_13/state
* finger_22/state
* finger_23/state
The node publishes the processed data on the following topic:
* tactile_data
The simulated bumper must obtain the collision data in the link that the
sensor is attached to. This is achieved by setting the "frameName" property
in the gazebo_ros_bumper controller.
Additional Links
Maintainers
- Bruno Brito
Authors
- Sven Schneider
README
No README found.
See repository README.
CHANGELOG
Changelog for package schunk_simulated_tactile_sensors
0.6.14 (2019-11-20)
- Merge pull request #215 from ipa320/indigo_release_candidate Indigo release candidate
- Merge branch \'indigo_dev\' into indigo_release_candidate
- Merge branch \'indigo_dev\' of github.com:ipa320/schunk_modular_robotics into indigo_release_candidate
- Merge pull request #199 from ipa320/indigo_dev Indigo dev
- Contributors: Christian Rauch, Felix Messmer, fmessmer
0.6.13 (2019-08-20)
0.6.12 (2018-08-16)
0.6.11 (2018-07-21)
0.6.10 (2018-01-07)
- Merge pull request #198 from ipa320/indigo_release_candidate Indigo release candidate
- Merge pull request #196 from ipa-fxm/update_maintainer update maintainer
- update maintainer
- Merge pull request #191 from ipa-fxm/APACHE_license use license apache 2.0
- use license apache 2.0
- Contributors: Felix Messmer, Florian Weisshardt, ipa-fxm
0.6.9 (2017-07-17)
- manually fix changelog
- Contributors: ipa-fxm
0.6.8 (2016-10-10)
0.6.7 (2016-04-01)
0.6.6 (2015-09-01)
0.6.5 (2015-08-31)
0.6.4 (2015-08-25)
- migration to package format 2
- remove trailing whitespaces
- remove obsolete autogenerated mainpage.dox files
- sort dependencies
- review dependencies
- Contributors: ipa-fxm
0.6.3 (2015-06-17)
- beautify CMakeLists
- Contributors: ipa-fxm
0.6.2 (2014-12-15)
0.6.1 (2014-09-22)
0.6.0 (2014-09-18)
0.5.6 (2014-08-27)
- catkin_lint\'ing
- Contributors: ipa-fxm
0.5.5 (2014-08-26)
- modifications in tranmissions, removing of bumpers and small cleanups
- Contributors: Alexander Bubeck
0.5.4 (2014-03-28)
0.5.3 (2014-03-27)
- install tags
- some catkin_lint
- Contributors: ipa-fxm
0.5.2 (2014-03-27)
- add dep to rostest
- Contributors: Florian Weisshardt
0.5.1 (2014-03-20)
- Adapted topics for simulated tactile sensors.
- installation stuff
- changed to new gazebo_msgs
- Initial catkinization. Still a linking error in sdh lib.
- switched namespace for simulated tactile sensors to dsa_controller (the same as on the robots)
- switched namespace for simulated tactile sensors to dsa_controller (the same as on the robots)
- updated documentation
- schunk_simulated_tactile_sensors: reordered pads to match joint state order
- moved simulated tactile sensors to schunk repository
- Contributors: Mathias L
Wiki Tutorials
See ROS Wiki Tutorials for more details.
Source Tutorials
Not currently indexed.
Package Dependencies
| Deps | Name | |
|---|---|---|
| 1 | catkin | |
| 1 | gazebo_msgs | |
| 1 | rospy | |
| 1 | schunk_sdh |
System Dependencies
No direct system dependencies.
Dependant Packages
| Name | Repo | Deps |
|---|---|---|
| schunk_modular_robotics | github-ipa320-schunk_modular_robotics |
Launch files
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged schunk_simulated_tactile_sensors at Robotics Stack Exchange
No version for distro ardent. Known supported distros are highlighted in the buttons above.
No version for distro bouncy. Known supported distros are highlighted in the buttons above.
No version for distro crystal. Known supported distros are highlighted in the buttons above.
No version for distro eloquent. Known supported distros are highlighted in the buttons above.
No version for distro dashing. Known supported distros are highlighted in the buttons above.
No version for distro galactic. Known supported distros are highlighted in the buttons above.
No version for distro foxy. Known supported distros are highlighted in the buttons above.
No version for distro lunar. Known supported distros are highlighted in the buttons above.
No version for distro jade. Known supported distros are highlighted in the buttons above.
|
|
schunk_simulated_tactile_sensors package from schunk_modular_robotics reposchunk_description schunk_libm5api schunk_modular_robotics schunk_powercube_chain schunk_sdh schunk_simulated_tactile_sensors |
|
|
Package Summary
| Tags | No category tags. |
| Version | 0.6.13 |
| License | Apache 2.0 |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Checkout URI | https://github.com/ipa320/schunk_modular_robotics.git |
| VCS Type | git |
| VCS Version | indigo_dev |
| Last Updated | 2019-09-30 |
| Dev Status | MAINTAINED |
| CI status | Continuous Integration |
| Released | RELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Package Description
This package provides simulated tactile sensors for the Schunk Dextrous
Hand (SDH) which is mounted on the Care-O-bot arm. The node subscribes to
the Gazebo bumper topics of the SDH. It transforms the Gazebo feedback to
the "tactile_data" topic to provide the same tactile sensor interface as
the schunk_sdh package.
The following parameters can be set:
* cells_x: The number of patches on the tactile sensor in the direction
perpendicular to the finger. Defaults to 6.
* cells_y: The number of patches on the tactile sensor along the direction
of the finger. Defaults to 14.
* output_range: The maximum output value of one patch. Defaults to 3500.
* sensitivity: The change of output in one patch per Newton. Defaults to
350. The sensitivity can be approximated by the following
formula: S = output_range / (measurement_range * cell_area)
- The measurement range of the tactile pads is 250 kPa (from
the data sheet).
- The output range can be determined by experiment from the
real SDH. It is about 3500.
- The cell area is the size of one patch. Length and width
of the area are determined by dividing the length/width
of the collision surface by the number of cells in the
respective direction.
Important: In most cases this is NOT the cell area that is
given in the data sheet!
* filter_length: The length of the moving average filter which smoothes
the values from simulation. Defaults to 10.
The node subscribes to the following topics to receive data from the
simulation:
* thumb_2/state
* thumb_3/state
* finger_12/state
* finger_13/state
* finger_22/state
* finger_23/state
The node publishes the processed data on the following topic:
* tactile_data
The simulated bumper must obtain the collision data in the link that the
sensor is attached to. This is achieved by setting the "frameName" property
in the gazebo_ros_bumper controller.
Additional Links
Maintainers
- Bruno Brito
Authors
- Sven Schneider
README
No README found.
See repository README.
CHANGELOG
Changelog for package schunk_simulated_tactile_sensors
0.6.13 (2019-08-20)
0.6.12 (2018-08-16)
0.6.11 (2018-07-21)
0.6.10 (2018-01-07)
- Merge pull request #198 from ipa320/indigo_release_candidate Indigo release candidate
- Merge pull request #196 from ipa-fxm/update_maintainer update maintainer
- update maintainer
- Merge pull request #191 from ipa-fxm/APACHE_license use license apache 2.0
- use license apache 2.0
- Contributors: Felix Messmer, Florian Weisshardt, ipa-fxm
0.6.9 (2017-07-17)
- manually fix changelog
- Contributors: ipa-fxm
0.6.8 (2016-10-10)
0.6.7 (2016-04-01)
0.6.6 (2015-09-01)
0.6.5 (2015-08-31)
0.6.4 (2015-08-25)
- migration to package format 2
- remove trailing whitespaces
- remove obsolete autogenerated mainpage.dox files
- sort dependencies
- review dependencies
- Contributors: ipa-fxm
0.6.3 (2015-06-17)
- beautify CMakeLists
- Contributors: ipa-fxm
0.6.2 (2014-12-15)
0.6.1 (2014-09-22)
0.6.0 (2014-09-18)
0.5.6 (2014-08-27)
- catkin_lint\'ing
- Contributors: ipa-fxm
0.5.5 (2014-08-26)
- modifications in tranmissions, removing of bumpers and small cleanups
- Contributors: Alexander Bubeck
0.5.4 (2014-03-28)
0.5.3 (2014-03-27)
- install tags
- some catkin_lint
- Contributors: ipa-fxm
0.5.2 (2014-03-27)
- add dep to rostest
- Contributors: Florian Weisshardt
0.5.1 (2014-03-20)
- Adapted topics for simulated tactile sensors.
- installation stuff
- changed to new gazebo_msgs
- Initial catkinization. Still a linking error in sdh lib.
- switched namespace for simulated tactile sensors to dsa_controller (the same as on the robots)
- switched namespace for simulated tactile sensors to dsa_controller (the same as on the robots)
- updated documentation
- schunk_simulated_tactile_sensors: reordered pads to match joint state order
- moved simulated tactile sensors to schunk repository
- Contributors: Mathias L
Wiki Tutorials
See ROS Wiki Tutorials for more details.
Source Tutorials
Not currently indexed.
Package Dependencies
| Deps | Name | |
|---|---|---|
| 1 | catkin | |
| 1 | gazebo_msgs | |
| 1 | rospy | |
| 1 | schunk_sdh |
System Dependencies
No direct system dependencies.
Dependant Packages
| Name | Repo | Deps |
|---|---|---|
| schunk_modular_robotics | github-ipa320-schunk_modular_robotics |
Launch files
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged schunk_simulated_tactile_sensors at Robotics Stack Exchange
|
|
schunk_simulated_tactile_sensors package from schunk_modular_robotics reposchunk_description schunk_libm5api schunk_modular_robotics schunk_powercube_chain schunk_sdh schunk_simulated_tactile_sensors |
|
|
Package Summary
| Tags | No category tags. |
| Version | 0.5.4 |
| License | LGPL |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Checkout URI | https://github.com/ipa320/schunk_modular_robotics.git |
| VCS Type | git |
| VCS Version | hydro_dev |
| Last Updated | 2014-08-25 |
| Dev Status | MAINTAINED |
| CI status | Continuous Integration |
| Released | RELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Package Description
This package provides simulated tactile sensors for the Schunk Dextrous
Hand (SDH) which is mounted on the Care-O-bot arm. The node subscribes to
the Gazebo bumper topics of the SDH. It transforms the Gazebo feedback to
the "tactile_data" topic to provide the same tactile sensor interface as
the schunk_sdh package.
The following parameters can be set:
* cells_x: The number of patches on the tactile sensor in the direction
perpendicular to the finger. Defaults to 6.
* cells_y: The number of patches on the tactile sensor along the direction
of the finger. Defaults to 14.
* output_range: The maximum output value of one patch. Defaults to 3500.
* sensitivity: The change of output in one patch per Newton. Defaults to
350. The sensitivity can be approximated by the following
formula: S = output_range / (measurement_range * cell_area)
- The measurement range of the tactile pads is 250 kPa (from
the data sheet).
- The output range can be determined by experiment from the
real SDH. It is about 3500.
- The cell area is the size of one patch. Length and width
of the area are determined by dividing the length/width
of the collision surface by the number of cells in the
respective direction.
Important: In most cases this is NOT the cell area that is
given in the data sheet!
* filter_length: The length of the moving average filter which smoothes
the values from simulation. Defaults to 10.
The node subscribes to the following topics to receive data from the
simulation:
* thumb_2/state
* thumb_3/state
* finger_12/state
* finger_13/state
* finger_22/state
* finger_23/state
The node publishes the processed data on the following topic:
* tactile_data
The simulated bumper must obtain the collision data in the link that the
sensor is attached to. This is achieved by setting the "frameName" property
in the gazebo_ros_bumper controller.
Additional Links
Maintainers
- Florian Weisshardt
Authors
- Sven Schneider
README
No README found.
See repository README.
CHANGELOG
Changelog for package schunk_simulated_tactile_sensors
0.5.4 (2014-03-28)
0.5.3 (2014-03-27)
- install tags
- some catkin_lint
- Contributors: ipa-fxm
0.5.2 (2014-03-27)
- add dep to rostest
- Contributors: Florian Weisshardt
0.5.1 (2014-03-20)
- Adapted topics for simulated tactile sensors.
- installation stuff
- changed to new gazebo_msgs
- Initial catkinization. Still a linking error in sdh lib.
- switched namespace for simulated tactile sensors to dsa_controller (the same as on the robots)
- switched namespace for simulated tactile sensors to dsa_controller (the same as on the robots)
- updated documentation
- schunk_simulated_tactile_sensors: reordered pads to match joint state order
- moved simulated tactile sensors to schunk repository
- Contributors: Mathias L
Wiki Tutorials
See ROS Wiki Tutorials for more details.
Source Tutorials
Not currently indexed.
Package Dependencies
| Deps | Name | |
|---|---|---|
| 1 | rospy | |
| 1 | schunk_sdh | |
| 2 | geometry_msgs | |
| 1 | rostest | |
| 1 | catkin |
System Dependencies
No direct system dependencies.
Dependant Packages
Launch files
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged schunk_simulated_tactile_sensors at Robotics Stack Exchange
|
|
schunk_simulated_tactile_sensors package from schunk_modular_robotics reposchunk_description schunk_libm5api schunk_modular_robotics schunk_powercube_chain schunk_sdh schunk_simulated_tactile_sensors |
|
|
Package Summary
| Tags | No category tags. |
| Version | 0.6.14 |
| License | Apache 2.0 |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Checkout URI | https://github.com/ipa320/schunk_modular_robotics.git |
| VCS Type | git |
| VCS Version | kinetic_dev |
| Last Updated | 2022-05-06 |
| Dev Status | MAINTAINED |
| CI status | Continuous Integration |
| Released | RELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Package Description
This package provides simulated tactile sensors for the Schunk Dextrous
Hand (SDH) which is mounted on the Care-O-bot arm. The node subscribes to
the Gazebo bumper topics of the SDH. It transforms the Gazebo feedback to
the "tactile_data" topic to provide the same tactile sensor interface as
the schunk_sdh package.
The following parameters can be set:
* cells_x: The number of patches on the tactile sensor in the direction
perpendicular to the finger. Defaults to 6.
* cells_y: The number of patches on the tactile sensor along the direction
of the finger. Defaults to 14.
* output_range: The maximum output value of one patch. Defaults to 3500.
* sensitivity: The change of output in one patch per Newton. Defaults to
350. The sensitivity can be approximated by the following
formula: S = output_range / (measurement_range * cell_area)
- The measurement range of the tactile pads is 250 kPa (from
the data sheet).
- The output range can be determined by experiment from the
real SDH. It is about 3500.
- The cell area is the size of one patch. Length and width
of the area are determined by dividing the length/width
of the collision surface by the number of cells in the
respective direction.
Important: In most cases this is NOT the cell area that is
given in the data sheet!
* filter_length: The length of the moving average filter which smoothes
the values from simulation. Defaults to 10.
The node subscribes to the following topics to receive data from the
simulation:
* thumb_2/state
* thumb_3/state
* finger_12/state
* finger_13/state
* finger_22/state
* finger_23/state
The node publishes the processed data on the following topic:
* tactile_data
The simulated bumper must obtain the collision data in the link that the
sensor is attached to. This is achieved by setting the "frameName" property
in the gazebo_ros_bumper controller.
Additional Links
Maintainers
- Bruno Brito
Authors
- Sven Schneider
README
No README found.
See repository README.
CHANGELOG
Changelog for package schunk_simulated_tactile_sensors
0.6.14 (2019-11-20)
- Merge pull request #215 from ipa320/indigo_release_candidate Indigo release candidate
- Merge branch \'indigo_dev\' into indigo_release_candidate
- Merge branch \'indigo_dev\' of github.com:ipa320/schunk_modular_robotics into indigo_release_candidate
- Merge pull request #199 from ipa320/indigo_dev Indigo dev
- Contributors: Christian Rauch, Felix Messmer, fmessmer
0.6.13 (2019-08-20)
0.6.12 (2018-08-16)
0.6.11 (2018-07-21)
0.6.10 (2018-01-07)
- Merge pull request #198 from ipa320/indigo_release_candidate Indigo release candidate
- Merge pull request #196 from ipa-fxm/update_maintainer update maintainer
- update maintainer
- Merge pull request #191 from ipa-fxm/APACHE_license use license apache 2.0
- use license apache 2.0
- Contributors: Felix Messmer, Florian Weisshardt, ipa-fxm
0.6.9 (2017-07-17)
- manually fix changelog
- Contributors: ipa-fxm
0.6.8 (2016-10-10)
0.6.7 (2016-04-01)
0.6.6 (2015-09-01)
0.6.5 (2015-08-31)
0.6.4 (2015-08-25)
- migration to package format 2
- remove trailing whitespaces
- remove obsolete autogenerated mainpage.dox files
- sort dependencies
- review dependencies
- Contributors: ipa-fxm
0.6.3 (2015-06-17)
- beautify CMakeLists
- Contributors: ipa-fxm
0.6.2 (2014-12-15)
0.6.1 (2014-09-22)
0.6.0 (2014-09-18)
0.5.6 (2014-08-27)
- catkin_lint\'ing
- Contributors: ipa-fxm
0.5.5 (2014-08-26)
- modifications in tranmissions, removing of bumpers and small cleanups
- Contributors: Alexander Bubeck
0.5.4 (2014-03-28)
0.5.3 (2014-03-27)
- install tags
- some catkin_lint
- Contributors: ipa-fxm
0.5.2 (2014-03-27)
- add dep to rostest
- Contributors: Florian Weisshardt
0.5.1 (2014-03-20)
- Adapted topics for simulated tactile sensors.
- installation stuff
- changed to new gazebo_msgs
- Initial catkinization. Still a linking error in sdh lib.
- switched namespace for simulated tactile sensors to dsa_controller (the same as on the robots)
- switched namespace for simulated tactile sensors to dsa_controller (the same as on the robots)
- updated documentation
- schunk_simulated_tactile_sensors: reordered pads to match joint state order
- moved simulated tactile sensors to schunk repository
- Contributors: Mathias L
Wiki Tutorials
See ROS Wiki Tutorials for more details.
Source Tutorials
Not currently indexed.
Package Dependencies
| Deps | Name | |
|---|---|---|
| 1 | catkin | |
| 1 | gazebo_msgs | |
| 1 | rospy | |
| 1 | schunk_sdh |
System Dependencies
No direct system dependencies.
Dependant Packages
| Name | Repo | Deps |
|---|---|---|
| schunk_modular_robotics | github-ipa320-schunk_modular_robotics |
Launch files
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged schunk_simulated_tactile_sensors at Robotics Stack Exchange
|
|
schunk_simulated_tactile_sensors package from schunk_modular_robotics reposchunk_description schunk_libm5api schunk_modular_robotics schunk_powercube_chain schunk_sdh schunk_simulated_tactile_sensors |
|
|
Package Summary
| Tags | No category tags. |
| Version | 0.6.14 |
| License | Apache 2.0 |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Checkout URI | https://github.com/ipa320/schunk_modular_robotics.git |
| VCS Type | git |
| VCS Version | kinetic_dev |
| Last Updated | 2022-05-06 |
| Dev Status | MAINTAINED |
| CI status | Continuous Integration : 0 / 0 |
| Released | RELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Package Description
This package provides simulated tactile sensors for the Schunk Dextrous
Hand (SDH) which is mounted on the Care-O-bot arm. The node subscribes to
the Gazebo bumper topics of the SDH. It transforms the Gazebo feedback to
the "tactile_data" topic to provide the same tactile sensor interface as
the schunk_sdh package.
The following parameters can be set:
* cells_x: The number of patches on the tactile sensor in the direction
perpendicular to the finger. Defaults to 6.
* cells_y: The number of patches on the tactile sensor along the direction
of the finger. Defaults to 14.
* output_range: The maximum output value of one patch. Defaults to 3500.
* sensitivity: The change of output in one patch per Newton. Defaults to
350. The sensitivity can be approximated by the following
formula: S = output_range / (measurement_range * cell_area)
- The measurement range of the tactile pads is 250 kPa (from
the data sheet).
- The output range can be determined by experiment from the
real SDH. It is about 3500.
- The cell area is the size of one patch. Length and width
of the area are determined by dividing the length/width
of the collision surface by the number of cells in the
respective direction.
Important: In most cases this is NOT the cell area that is
given in the data sheet!
* filter_length: The length of the moving average filter which smoothes
the values from simulation. Defaults to 10.
The node subscribes to the following topics to receive data from the
simulation:
* thumb_2/state
* thumb_3/state
* finger_12/state
* finger_13/state
* finger_22/state
* finger_23/state
The node publishes the processed data on the following topic:
* tactile_data
The simulated bumper must obtain the collision data in the link that the
sensor is attached to. This is achieved by setting the "frameName" property
in the gazebo_ros_bumper controller.
Additional Links
Maintainers
- Bruno Brito
Authors
- Sven Schneider
README
No README found.
See repository README.
CHANGELOG
Changelog for package schunk_simulated_tactile_sensors
0.6.14 (2019-11-20)
- Merge pull request #215 from ipa320/indigo_release_candidate Indigo release candidate
- Merge branch \'indigo_dev\' into indigo_release_candidate
- Merge branch \'indigo_dev\' of github.com:ipa320/schunk_modular_robotics into indigo_release_candidate
- Merge pull request #199 from ipa320/indigo_dev Indigo dev
- Contributors: Christian Rauch, Felix Messmer, fmessmer
0.6.13 (2019-08-20)
0.6.12 (2018-08-16)
0.6.11 (2018-07-21)
0.6.10 (2018-01-07)
- Merge pull request #198 from ipa320/indigo_release_candidate Indigo release candidate
- Merge pull request #196 from ipa-fxm/update_maintainer update maintainer
- update maintainer
- Merge pull request #191 from ipa-fxm/APACHE_license use license apache 2.0
- use license apache 2.0
- Contributors: Felix Messmer, Florian Weisshardt, ipa-fxm
0.6.9 (2017-07-17)
- manually fix changelog
- Contributors: ipa-fxm
0.6.8 (2016-10-10)
0.6.7 (2016-04-01)
0.6.6 (2015-09-01)
0.6.5 (2015-08-31)
0.6.4 (2015-08-25)
- migration to package format 2
- remove trailing whitespaces
- remove obsolete autogenerated mainpage.dox files
- sort dependencies
- review dependencies
- Contributors: ipa-fxm
0.6.3 (2015-06-17)
- beautify CMakeLists
- Contributors: ipa-fxm
0.6.2 (2014-12-15)
0.6.1 (2014-09-22)
0.6.0 (2014-09-18)
0.5.6 (2014-08-27)
- catkin_lint\'ing
- Contributors: ipa-fxm
0.5.5 (2014-08-26)
- modifications in tranmissions, removing of bumpers and small cleanups
- Contributors: Alexander Bubeck
0.5.4 (2014-03-28)
0.5.3 (2014-03-27)
- install tags
- some catkin_lint
- Contributors: ipa-fxm
0.5.2 (2014-03-27)
- add dep to rostest
- Contributors: Florian Weisshardt
0.5.1 (2014-03-20)
- Adapted topics for simulated tactile sensors.
- installation stuff
- changed to new gazebo_msgs
- Initial catkinization. Still a linking error in sdh lib.
- switched namespace for simulated tactile sensors to dsa_controller (the same as on the robots)
- switched namespace for simulated tactile sensors to dsa_controller (the same as on the robots)
- updated documentation
- schunk_simulated_tactile_sensors: reordered pads to match joint state order
- moved simulated tactile sensors to schunk repository
- Contributors: Mathias L
Wiki Tutorials
See ROS Wiki Tutorials for more details.
Source Tutorials
Not currently indexed.
Package Dependencies
| Deps | Name | |
|---|---|---|
| 1 | catkin | |
| 1 | gazebo_msgs | |
| 1 | rospy | |
| 1 | schunk_sdh |
System Dependencies
No direct system dependencies.
Dependant Packages
| Name | Repo | Deps |
|---|---|---|
| schunk_modular_robotics | github-ipa320-schunk_modular_robotics |
Launch files
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.