ROS Index
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/ohm-ros-pkg/optris_drivers.git |
| VCS Type | git |
| VCS Version | groovy-devel |
| Last Updated | 2016-08-11 |
| Dev Status | UNMAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers | 1.1.0 |
README
optris_drivers
ROS drivers for Optris thermal imagers
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/ohm-ros-pkg/optris_drivers.git |
| VCS Type | git |
| VCS Version | groovy-devel |
| Last Updated | 2016-08-11 |
| Dev Status | UNMAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers | 1.1.0 |
README
optris_drivers
ROS drivers for Optris thermal imagers
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/ohm-ros-pkg/optris_drivers.git |
| VCS Type | git |
| VCS Version | groovy-devel |
| Last Updated | 2016-08-11 |
| Dev Status | UNMAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers | 1.1.0 |
README
optris_drivers
ROS drivers for Optris thermal imagers
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers.git |
| VCS Type | git |
| VCS Version | kinetic-devel |
| Last Updated | 2018-07-11 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers | 1.1.0 |
README
optris_drivers
ROS drivers for Optris thermal imagers
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-07-29 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers | 1.1.0 |
README
optris_drivers
ROS drivers for Optris thermal imagers
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep
CONTRIBUTING
Repository Summary
| Checkout URI | https://github.com/evocortex/optris_drivers2.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2020-03-27 |
| Dev Status | MAINTAINED |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Packages
| Name | Version |
|---|---|
| optris_drivers2 | 0.0.1 |
README
ROS2 wrapper for irDirectSDK
Installation
Nodes have been tested with the version Dashing Diademata (short form: Dashing)
Reference: https://index.ros.org/doc/ros2/Installation/
Environment setup
$ source /opt/ros/dashing/setup.bash
$ source install/setup.bash
Services
Capitalized service names are no longer valid. Use underscores to define parameters.
Parameters
Passing ROS command line parameters is not supported in Dashing. The version eloquent will introduce this features. Thus, a plain command line parameter has been used for this version. argv[1] must be the path to a valid xml configuration file.
Build
$ colcon build --symlink-install
Execute
… device driver node
$ ros2 run optris_drivers2 optris_imager_node <xml_config_path>
… color conversion node (converts temperature images to false color images)
$ ros2 run optris_drivers2 optris_colorconvert_node
… displaying images
$ ros2 run image_tools showimage -t /thermal_image_view
… switch palette for color conversion
$ ros2 service call palette optris_drivers2/srv/Palette "{palette : 3}"
Image compression
The node optris_colorconvert_node can publish compressed images via image_transport. Be sure to have installed image-transport-plugins:
$ sudo apt install ros-dashing-image-transport-plugins
Bandwidth measurement can be done either raw:
$ ros2 topic bw /thermal_image_view
or compressed:
$ ros2 topic bw /thermal_image_view/compressed
Installing IR Imager Direct SDK
In order to successfully compile this package, the IR Imager Direct SDK for Optris cameras is needed. You can download it from http://ftp.evocortex.com/
If you want to install the latest available version using rosdep, add a rosdep source by executing
sudo sh -c 'echo "yaml https://raw.githubusercontent.com/evocortex/optris_drivers2/master/libirimager.yaml " > /etc/ros/rosdep/sources.list.d/19-libirimager.list'
in a Linux terminal. For further information regarding rosdep, see http://wiki.ros.org/rosdep