ROS Index
No version for distro humble. Known supported distros are highlighted in the buttons above.
No version for distro iron. Known supported distros are highlighted in the buttons above.
No version for distro jazzy. Known supported distros are highlighted in the buttons above.
No version for distro rolling. Known supported distros are highlighted in the buttons above.
No version for distro noetic. Known supported distros are highlighted in the buttons above.
No version for distro ardent. Known supported distros are highlighted in the buttons above.
No version for distro bouncy. Known supported distros are highlighted in the buttons above.
No version for distro crystal. Known supported distros are highlighted in the buttons above.
No version for distro eloquent. Known supported distros are highlighted in the buttons above.
No version for distro dashing. Known supported distros are highlighted in the buttons above.
No version for distro galactic. Known supported distros are highlighted in the buttons above.
No version for distro foxy. Known supported distros are highlighted in the buttons above.
No version for distro lunar. Known supported distros are highlighted in the buttons above.
No version for distro jade. Known supported distros are highlighted in the buttons above.
Repository Summary
| Checkout URI | https://github.com/ros-industrial/ur_modern_driver.git |
| VCS Type | git |
| VCS Version | master |
| Last Updated | 2022-11-11 |
| Dev Status | MAINTAINED |
| CI status | No Continuous Integration |
| Released | RELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Packages
| Name | Version |
|---|---|
| ur_modern_driver | 0.0.1 |
README
ur_modern_driver - Deprecated
Deprecation notice
note: the master branch contains a deprecated version of this driver, kept for archival purposes only.
ur_modern_driver has been deprecated completely in favour of ur_robot_driver.
Users with CB3 and e-Series controllers should use ur_robot_driver.
Refer to the announcement on ROS Discourse for more information.
Click to see original readme
## Overview A new driver for the UR3/UR5/UR10 robot arms from Universal Robots. It is designed to replace the old driver transparently, while solving some issues, improving usability as well as enabling compatibility of ros_control. ## Improvements * A script is only running on the robot while a trajectory is actually executing. This means that the teach pendant can be used to move the robot around while the driver is connected. * The driver exposes the same functionality as the previous ur\_driver: * Action interface on */follow\_joint\_trajectory* for seamless integration with MoveIt * Publishes robot joint state on */joint\_states* * Publishes TCP force on */wrench* * Publishes IO state on */ur\_driver/io\_states* (Note that the string */ur\_driver* has been prepended compared to the old driver) * Service call to set outputs and payload - Again, the string */ur\_driver* has been prepended compared to the old driver (Note: I am not sure if setting the payload actually works, as the robot GUI does not update. This is also true for the old ur\_driver ) * Besides this, the driver subscribes to two new topics: * */ur\_driver/URScript* : Takes messages of type _std\_msgs/String_ and directly forwards it to the robot. Note that no control is done on the input, so use at your own risk! Inteded for sending movel/movej commands directly to the robot, conveyor tracking and the like. * */joint\_speed* : Takes messages of type _trajectory\_msgs/JointTrajectory_. Parses the first JointTracetoryPoint and sends the specified joint speeds and accelerations to the robot. This interface is intended for doing visual servoing and other kind of control that requires speed control rather than position control of the robot. Remember to set values for all 6 joints. Ignores the field joint\_names, so set the values in the correct order. * Added support for ros_control. * As ros_control wants to have control over the robot at all times, ros_control compatibility is set via a parameter at launch-time. * With ros_control active, the driver doesn't open the action_lib interface nor publish joint_states or wrench msgs. This is handled by ros_control instead. * Currently two controllers are available, both controlling the joint position of the robot, useable for trajectroy execution * The velocity based controller sends joint speed commands to the robot, using the speedj command * The position based controller sends joint position commands to the robot, using the servoj command * I have so far only used the velocity based controller, but which one is optimal depends on the application. * As ros_control continuesly controls the robot, using the teach pendant while a controller is running will cause the controller **on the robot** to crash, as it obviously can't handle conflicting control input from two sources. Thus be sure to stop the running controller **before** moving the robot via the teach pendant: * A list of the loaded and running controllers can be found by a call to the controller_manager ```rosservice call /controller_manager/list_controllers {} ``` * The running position trajectory controller can be stopped with a call to ```rosservice call /universal_robot/controller_manager/switch_controller "start_controllers: - '' stop_controllers: - 'pos_based_pos_traj_controller' strictness: 1" ``` (Remember you can use tab-completion for this) ## Installation **As the driver communicates with the robot via ethernet and depends on reliable continous communication, it is not possible to reliably control a UR from a virtual machine.** Just clone the repository into your catkin working directory and make it with ```catkin_make ```. Note that this package depends on ur_msgs, hardware_interface, and controller_manager so it cannot directly be used with ROS versions prior to hydro. ## Usage The driver is designed to be a drop-in replacement of the ur\_driver package. It _won't_ overwrite your current driver though, so you can use and test this package without risking to break your current setup. If you want to test it in your current setup, just use the modified launch files included in this package instead of those in ur\_bringup. Everything else should work as usual. If you would like to run this package to connect to the hardware, you only need to run the following launch file. ``` roslaunch ur_modern_driver urXX_bringup.launch robot_ip:=ROBOT_IP_ADDRESS ``` Where ROBOT_IP_ADDRESS is your UR arm's IP and XX is '5' or '10' depending on your robot. The above launch file makes calls to both roscore and the launch file to the urXX_description so that ROS's parameter server has information on your robot arm. If you do not have your ```ur_description ``` installed please do so via: ``` sudo apt install ros-CONTRIBUTING
No CONTRIBUTING.md found.
No version for distro hydro. Known supported distros are highlighted in the buttons above.
Repository Summary
| Checkout URI | https://github.com/ros-industrial/ur_modern_driver.git |
| VCS Type | git |
| VCS Version | kinetic-devel |
| Last Updated | 2022-11-11 |
| Dev Status | MAINTAINED |
| CI status | No Continuous Integration |
| Released | UNRELEASED |
| Tags | No category tags. |
| Contributing |
Help Wanted (0)
Good First Issues (0) Pull Requests to Review (0) |
Packages
| Name | Version |
|---|---|
| ur_modern_driver | 0.1.0 |
README
ur_modern_driver - Deprecated
Deprecation notice
This package has been deprecated. It will not see any further development or new features.
Users with CB3 and e-Series controllers should use ur_robot_driver.
As ur_robot_driver is not compatible with CB2 and older controllers, users with those controllers may still use this package.
Refer to the announcement on ROS Discourse for more information.
Click to see original readme
A new driver for the UR3/UR5/UR10 robot arms from Universal Robots. It is designed to replace the old driver transparently, while solving some issues, improving usability as well as enabling compatibility of ros_control. ## Improvements * A script is only running on the robot while a trajectory is actually executing. This means that the teach pendant can be used to move the robot around while the driver is connected. * The driver exposes the same functionality as the previous ur\_driver: * Action interface on */follow\_joint\_trajectory* for seamless integration with MoveIt * Publishes robot joint state on */joint\_states* * Publishes TCP force on */wrench* * Publishes IO state on */ur\_driver/io\_states* (Note that the string */ur\_driver* has been prepended compared to the old driver) * Service call to set outputs and payload - Again, the string */ur\_driver* has been prepended compared to the old driver (Note: I am not sure if setting the payload actually works, as the robot GUI does not update. This is also true for the old ur\_driver ) * Additionally, the masterboard state and robot mode are published to */ur\_driver/masterboard\_state* and */ur\_driver/robot\_mode\_state*. (Note: Only the parameters that are shared between all robot firmwares are published. The `digital_input_bits` and `digital_output_bits` fields of the MasterboardDataMsg are not set. Use the IOStates message for these.) * Besides this, the driver subscribes to two new topics: * */ur\_driver/URScript* : Takes messages of type _std\_msgs/String_ and directly forwards it to the robot. Note that no control is done on the input, so use at your own risk! Intended for sending movel/movej commands directly to the robot, conveyor tracking and the like. Completion can be checked with the */ur\_driver/robot_mode_state* topic. Include *ur_modern_driver/wait_for_program.h* for a convenience function. * */joint\_speed* : Takes messages of type _trajectory\_msgs/JointTrajectory_. Parses the first JointTrajectoryPoint and sends the specified joint speeds and accelerations to the robot. This interface is intended for doing visual servoing and other kind of control that requires speed control rather than position control of the robot. Remember to set values for all 6 joints. Ignores the field joint\_names, so set the values in the correct order. * Added support for ros_control. * As ros_control wants to have control over the robot at all times, ros_control compatibility is set via a parameter at launch-time. * With ros_control active, the driver doesn't open the action_lib interface nor publish joint_states or wrench msgs. This is handled by ros_control instead. * Currently two controllers are available, both controlling the joint position of the robot, useable for trajectroy execution * The velocity based controller sends joint speed commands to the robot, using the speedj command * The position based controller sends joint position commands to the robot, using the servoj command * I have so far only used the velocity based controller, but which one is optimal depends on the application. * As ros_control continuously controls the robot, using the teach pendant while a controller is running will cause the controller **on the robot** to crash, as it obviously can't handle conflicting control input from two sources. Thus be sure to stop the running controller **before** moving the robot via the teach pendant: * A list of the loaded and running controllers can be found by a call to the controller_manager ```rosservice call /controller_manager/list_controllers {} ``` * The running position trajectory controller can be stopped with a call to ```rosservice call /universal_robot/controller_manager/switch_controller "start_controllers: - '' stop_controllers: - 'pos_based_pos_traj_controller' strictness: 1" ``` (Remember you can use tab-completion for this) * Added activation modes: `Never`, `Always` and `OnStartup`. Sets wether a call to the `ur_driver/robot_enable` service is required at startup, at startup + on errors or never. Is intended as a safety feature to require some sort of manual intervention in case of driver crashes and robot safety faults. * **Low Bandwidth Trajectory Follower** mode of execution. (only works when `ros_control` is set to `false`)In this mode the real-time control loop for the robot is shifted from the client PC running the driver to URscript executed on the URControl PC of the robot with the following features: * It works only with */follow\_joint\_trajectory* action for MoveIt integration. It is mutually exclusive with *ros_control* * It only implements "position + velocity" based control - it uses coarse positions and velocities calculated by MoveIt and performs cubic interpolation of joint positions (Bezier' curve) of positions. The positions are set using servoj command of URScript. * It is much more resilient to connectivity problems than other methods of ur_modern_driver. It is resilient to additional load on client PC, latency of network and kernel of the PC the driver runs on. This makes it much better suitable for development/research quick iteration loops without separate dedicated physical setup. * Other methods of controlling the robot by ur_modern_driver are very fragile and require low-latency kernel, separated wired network and ideally no other network activity on the PC where ur_modern_driver runs. * **Low Bandwidth Trajectory Follower** will never make dangerous "catch-up" when move is delayed. Other methods prioritise execution time of a move which sometimes might lead to situation where robot gets out of control and speeds up to catch-up - often resulting in Protective Stop. For Low Bandwith Trajectory Follower predictability of the move has priority over move execution time. * The amount of TCP/IP communication between the driver and UR robot (URControl PC) is two orders of magnitude (around 100x) less with **Low Bandwidth Trajectory Follower** than with other methods- coarse MoveIt generated trajectory is sent to robot and cubic interpolation of the move is calculated by the URScript program run on URControl PC. * Due to communication optimisations and **Low Bandwidth Trajectory Follower** works reliably even over WiFi connection (!) which is impossible for other methods. * Time flow for the URScript program might be independent from "real time" and can be controlled to speed up or slow down execution of planned moves. * The Low Bandwidth Trajectory Follower requires 3.0+ version firmware of the robot (servoj command must support lookahead_time and servoj_gain parameters) * There are several parameters that you can use to control Low Bandwidth Trajectory Follower's behaviour: * **use_lowbandwidth_trajectory_follower** - should be set to `true` to enable the follower * **time_interval** - time interval (in seconds) this is 'simulated' time for interpolation steps of the move. Together with *servoj_time* it can be used to change speed of moves even after they are planned by MoveIt. Default value is 0.008 * **servoj_time** - time interval (real time) for which each interpolation step controls the robot (using servoj command). See below on examples of setting different time parameters. Default value is 0.008 (corresponds to expected 125Hz frequency of UR robot control) * **servoj_time_waiting** - time in seconds (real time) of internal active loop while the robot waits for new instructions in case of delays in communication. The smaller value, the faster robot restarts move after delay (but more stress is put on URControl processor). Default value is 0.001 (1000 Hz check frequency) * **max_waiting_time** - maximum time in seconds (real time) to wait for instructions from the drive before move is aborted. Defaults to 2 seconds. * **servoj_gain** and **servoj_lookahead_time** - useful to control precision and speed of the position moves with servoj command (see URScript documentation for detailes) * **max_joint_difference** - maximum allowed difference between target and actual joints - checked at every trajectory step Here are some examples of manipulating the time flow for **Low Bandwidth Trajectory Follower** mode. You can use other settings but you should do it on your own risk. * Default mode: *servoj_time* = 0.008, *time_interval* = 0.008 : interpolation time flows with the same speed as real time - moves are executed as planned * Slow-motion mode: *servoj_time* = 0.008, *time_interval* = 0.004 : interpolation time flows 2x slower than real time, so the move is executed 2x slower than planned. Requires configuring MoveIt to accept much slower moves than expected (otherwise MoveIt cancels such move mid-way) * Fast-forward mode: *servoj_time* = 0.004, *time_interval* = 0.012 : interpolation time flows 3x faster than real time, so the move is 3x faster than planned. Might violate limits of the robot speed so use carefully and make sure you gradually increase the speed in-between to check how safe it is. NOTE! In case you use Low Bandwidth Trajectory Follower and you experience MoveIt to cancel robot moves prematurely because of too long move duration, you should increase tolerance of duration monitoring of MoveIt trajectory execution You can find the configuration usually in trajectory_execution.launch.xml in generated moveit config - there are parameters that configure scaling and margin for allowed execution time among others. The relevant parameters are `trajectory_execution/allowed_execution_duration_scaling` (default 1.2) and `trajectory_execution/allowed_goal_duration_margin` (default 0.5). The first one is factor that scales execution time, the second is margin that is added on top of the scaled one. You can increase either of those values to make moveit executor more "tolerant" to execution delays. There is also another parameter: `trajectory_execution/execution_duration_monitoring`. You can set it to false to disable duration monitoring completely. ## Installation **As the driver communicates with the robot via ethernet and depends on reliable continous communication, it is not possible to reliably control a UR from a virtual machine.** If building this package from source, you can clone this repository into the source space of your Catkin workspace using the following command: ```bash $ git clone -b kinetic-devel https://github.com/ros-industrial/ur_modern_driver.git ``` Note that this package depends on ur_msgs, hardware_interface, and controller_manager so it cannot directly be used with ROS versions prior to hydro. ## Usage The driver is designed to be a drop-in replacement of the ur\_driver package. It _won't_ overwrite your current driver though, so you can use and test this package without risking to break your current setup. If you want to test it in your current setup, just use the modified launch files included in this package instead of those in ur\_bringup. Everything else should work as usual. If you would like to run this package to connect to the hardware, you only need to run the following launch file. ``` roslaunch ur_modern_driver urXX_bringup.launch robot_ip:=ROBOT_IP_ADDRESS ``` Where ROBOT_IP_ADDRESS is your UR arm's IP and XX is '5' or '10' depending on your robot. The above launch file makes calls to both roscore and the launch file to the urXX_description so that ROS's parameter server has information on your robot arm. If you do not have your ```ur_description ``` installed please do so via: ``` sudo apt install ros-CONTRIBUTING
No CONTRIBUTING.md found.
No version for distro melodic. Known supported distros are highlighted in the buttons above.