|Tags||No category tags.|
|CI status||No Continuous Integration|
|Package Tags||No category tags.|
Help Wanted (0)
Good First Issues (0)
Pull Requests to Review (0)
ROS2 package for smoothing commanded velocities represented by a stream of
geometry_msg/Twist messages. It applies limits to linear and angular
components of both speed and acceleration. Feedback from either
the odometry / actual commanded velocity can be used to provide
a better result in some situations (read further below).
- ~accel_lim_v (double, default: 0.8): linear acceleration limit
- ~accel_lim_w (double, default: 5.4): angular acceleration limit
- ~speed_lim_v (double, default: 0.3): linear velocity limit
- ~speed_lim_w (double, default: 3.5): angular velocity limit
- ~decel_factor (double, default: 1.0): multiplier for the acceleration limit when decelerating
- ~frequency (double, default: 20.0): computed and published rate, adhered to regardless of the incoming message rate (interpolates when necessary)
- ~feedback (int, default: 0): the type of feedback to use (0 - none, 1 - odometry, 2 - actual commanded velocities)
geometry_msgs/Twist): input velocity commands
nav_msgs/Odometry): topic for odometry feedback, only required if the requested feedback has been set for odometry
geometry_msgs/Twist): topic for actual commanded velocity feedback, only required if the requested feedback has been set for actual commanded velocities
geometry_msgs/Twist): smoothed output velocity commands respecting velocity and acceleration limits
- All the parameters except frequency are dynamically reconfigurable.
- Linear and angular velocities are smoothed proportionally to the more restricted, so we guaranty a constant rotation radius.
- If the input topic gets inactive, and the last command is not a zero-velocity one, (maybe the controller crashed, or just forgot good manners...), we introduce a fake zero-velocity command after a sort timeout.
Simply wire up the channels to their appropriate topics. The tests can be a useful starting point.
There are some reasons to use robot feedback. The two most frequently faced:
- Multiple controllers compete for controlling the robot via a multiplexer. A controller that has been excluded by another with higher priority may suddenly issue commands significantly different to the last commanded velocity when the multiplexer has switched back to it. i.e. the commanded velocity profile experiences a large, discrete jump. In these cases, option 2 is very useful.
- The robot fails to generate the commanded velocity due to, for example, unmodelled inclines, carpets etc. In these cases, option 1 is very useful.
- [ros2] parameters/topics renamed more sensibly, #8
- [docs] moved from the ROS1 wiki and updated, #8
- [tests] translational smoothing test added, #7
- [infra] refactored for ROS 2 and renamed to velocity_smoother, #1
- yocs_velocity_smoother: adds node name param to launcher
- adds a little launcher restructing for muxer and smoother
- Contributors: Marcus Liebhardt
- updating package informations. remove email for authors. updating maintainer
- Contributors: Jihoon Lee
- Unify naming politics for binaries and plugins.
- Add bugtracker and repo info URLs.
- Changelogs at package level.
- Separate and comment velocity feedback remaps.
- License link fixed.
- Fix on velocity smoother to deal with low-rate simulated time (namely Stage).
- Allow using end velocity commands as robot feedback (until now we can use only odometry).
- Dynamic reconfigure for velocity/acceleration limits.
- Fix on deceleration smoothing.
- Add test program.
- Add licensing.
- Keep direction constant when smoothing velocities, i.e. draw constant arcs. To do so we must sometimes over-limit dv or dw.
- Bound velocity in addition to acceleration. Also set physically meaningful values for acceleration.
- Initial version.