Building ROS 2 on OS X¶
Table of Contents
We support OS X 10.12.x.
However, some new versions like 10.13.x and some older versions like 10.11.x and 10.10.x are known to work as well.
You need the following things installed to build ROS 2:
If you don’t already have it installed, install Xcode and the Command Line Tools:
brew (needed to install more stuff; you probably already have this):
Follow installation instructions at http://brew.sh/
Optional: Check that
brewis happy with your system configuration by running:
Fix any problems that it identifies.
brewto install more stuff:
brew install cmake cppcheck eigen pcre poco python3 tinyxml wget # install dependencies for Fast-RTPS if you are using it brew install asio tinyxml2 brew install opencv # install console_bridge for rosbag2 brew install console_bridge # install OpenSSL for DDS-Security brew install openssl # if you are using ZSH, then replace '.bashrc' with '.zshrc' echo "export OPENSSL_ROOT_DIR=$(brew --prefix openssl)" >> ~/.bashrc # install dependencies for rcl_logging_log4cxx brew install log4cxx
Install rviz dependencies
# install dependencies for Rviz brew install qt freetype assimp # Add the Qt directory to the PATH and CMAKE_PREFIX_PATH export CMAKE_PREFIX_PATH=$CMAKE_PREFIX_PATH:/usr/local/opt/qt export PATH=$PATH:/usr/local/opt/qt/bin
python3 -m pip(just
pipmay install Python3 or Python2) to install more stuff:
python3 -m pip install -U argcomplete catkin_pkg colcon-common-extensions coverage cryptography empy flake8 flake8-blind-except flake8-builtins flake8-class-newline flake8-comprehensions flake8-deprecated flake8-docstrings flake8-import-order flake8-quotes ifcfg mypy lark-parser mock nose pep8 pydocstyle pyparsing pytest-mock setuptools vcstool
Please ensure that the
$PATHenvironment variable contains the install location of the binaries (default:
Optional: if you want to build the ROS 1<->2 bridge, then you must also install ROS 1:
Start with the normal install instructions: http://wiki.ros.org/kinetic/Installation/OSX/Homebrew/Source
When you get to the step where you call
rosinstall_generatorto get the source code, here’s an alternate invocation that brings in just the minimum required to produce a useful bridge:
rosinstall_generator catkin common_msgs roscpp rosmsg --rosdistro kinetic --deps --wet-only --tar > kinetic-ros2-bridge-deps.rosinstall wstool init -j8 src kinetic-ros2-bridge-deps.rosinstall
Otherwise, just follow the normal instructions, then source the resulting
install_isolated/setup.bashbefore proceeding here to build ROS 2.
OS X versions >=10.11 have System Integrity Protection enabled by default.
So that SIP doesn’t prevent processes from inheriting dynamic linker environment variables, such as
DYLD_LIBRARY_PATH, you’ll need to disable it following these instructions.
Create a workspace and clone all repos:
mkdir -p ~/ros2_ws/src cd ~/ros2_ws wget https://raw.githubusercontent.com/ros2/ros2/master/ros2.repos vcs import src < ros2.repos
ROS 2 builds on top of DDS. It is compatible with multiple DDS or RTPS (the DDS wire protocol) vendors. The repositories you downloaded for ROS 2 includes eProsima’s Fast RTPS, which is the only bundled vendor. If you would like to use one of the other vendors you will need to install their software separately before building. The ROS 2 build will automatically build support for vendors that have been installed and sourced correctly.
By default we include eProsima’s FastRTPS in the workspace and it is the default middleware. Detailed instructions for installing other DDS vendors are provided in the “Alternative DDS sources” section below.
Note: if you are trying to build the ROS 1 <-> ROS 2 bridge, follow instead these modified instructions.
colcon tool to build everything (more on using
colcon in this tutorial):
cd ~/ros2_ws/ colcon build --symlink-install
In a clean new terminal, source the setup file (this will automatically set up the environment for any DDS vendors that support was built for) and then run a
. ~/ros2_ws/install/setup.bash ros2 run demo_nodes_cpp talker
In another terminal source the setup file and then run a
. ~/ros2_ws/install/setup.bash ros2 run demo_nodes_cpp listener
You should see the
talker saying that it’s
Publishing messages and the
I heard those messages.
The demos will attempt to build against any detected DDS vendor. The only bundled vendor is eProsima’s Fast RTPS, which is included in the default set of sources for ROS 2. If you would like to switch out the vendor below are the instructions. When you run the build make sure that your chosen DDS vendor(s) are exposed in your environment.
When multiple vendors are present, you can choose the used RMW implementation by setting the the environment variable
RMW_IMPLEMENTATION to the package providing the RMW implementation.
See Working with multiple RMW implementations for more details.
If you would like to also build against RTI Connext DDS there are options available for university, purchase or evaluation
You also need a Java runtime installed to run the RTI code generator, which you can get here.
After installing, run RTI launcher and point it to your license file.
Source the setup file to set the
NDDSHOME environment variable before building your workspace.
The setup file and path will depend on your macOS version.
# macOS 10.12 Sierra source /Applications/rti_connext_dds-5.3.1/resource/scripts/rtisetenv_x64Darwin16clang8.0.bash # macOS 10.13 High Sierra source /Applications/rti_connext_dds-5.3.1/resource/scripts/rtisetenv_x64Darwin17clang9.0.bash
You may need to increase shared memory resources following https://community.rti.com/kb/osx510.
If you want to install the Connext DDS-Security plugins please refer to this page.
pyenv seems to default to building Python with
.a files, but that causes issues with
rclpy, so it’s recommended to build Python with Frameworks enabled on macOS when using
If you are seeing library loading issues at runtime (either running tests or running nodes), such as the following:
ImportError: dlopen(.../ros2_install/ros2-osx/lib/python3.7/site-packages/rclpy/_rclpy.cpython-37m-darwin.so, 2): Library not loaded: @rpath/librcl_interfaces__rosidl_typesupport_c.dylib Referenced from: .../ros2_install/ros2-osx/lib/python3.7/site-packages/rclpy/_rclpy.cpython-37m-darwin.so Reason: image not found
then you probably have System Integrity Protection enabled. See “Disable System Integrity Protection (SIP)” above for how instructions on how to disable it.
If you see build errors related to Qt, e.g.:
In file included from /usr/local/opt/qt/lib/QtGui.framework/Headers/qguiapplication.h:46: /usr/local/opt/qt/lib/QtGui.framework/Headers/qinputmethod.h:87:5: error: unknown type name 'Q_ENUM' Q_ENUM(Action) ^
you may be using qt4 instead of qt5: see https://github.com/ros2/ros2/issues/441
Missing symbol when opencv (and therefore libjpeg, libtiff, and libpng) are installed with Homebrew¶
If you have opencv installed you might get this:
dyld: Symbol not found: __cg_jpeg_resync_to_restart Referenced from: /System/Library/Frameworks/ImageIO.framework/Versions/A/ImageIO Expected in: /usr/local/lib/libJPEG.dylib in /System/Library/Frameworks/ImageIO.framework/Versions/A/ImageIO /bin/sh: line 1: 25274 Trace/BPT trap: 5 /usr/local/bin/cmake
If so, to build you’ll have to do this:
$ brew unlink libpng libtiff libjpeg
But this will break opencv, so you’ll also need to update it to continue working:
$ sudo install_name_tool -change /usr/local/lib/libjpeg.8.dylib /usr/local/opt/jpeg/lib/libjpeg.8.dylib /usr/local/lib/libopencv_highgui.2.4.dylib $ sudo install_name_tool -change /usr/local/lib/libpng16.16.dylib /usr/local/opt/libpng/lib/libpng16.16.dylib /usr/local/lib/libopencv_highgui.2.4.dylib $ sudo install_name_tool -change /usr/local/lib/libtiff.5.dylib /usr/local/opt/libtiff/lib/libtiff.5.dylib /usr/local/lib/libopencv_highgui.2.4.dylib $ sudo install_name_tool -change /usr/local/lib/libjpeg.8.dylib /usr/local/opt/jpeg/lib/libjpeg.8.dylib /usr/local/Cellar/libtiff/4.0.4/lib/libtiff.5.dylib
The first command is necessary to avoid things built against the system libjpeg (etc.) from getting the version in /usr/local/lib. The others are updating things built by Homebrew so that they can find the version of libjpeg (etc.) without having them in /usr/local/lib.